|
Square Tapered Poles
METALPOL also offers Square Tapered
Poles. Square tapered and non-tapered poles are a
popular, affordable and attractive choice for area
lighting for schools, shopping centers , parks, hotels,
and churches.
METALPOL also offers Square
Tapered Poles. Manufactured from structural quality
weldable grade steel coils (A-1011 - 55,000 psi; or
A-572 - 65,000 psi), these poles also include one full-length
longitudinal welding seam. Steel thickness can range
from 11 gauge (3.0 mm) to 1/4 inch (6.35mm).Each piece
can range in height from 8 feet (2.4 meters) to 50 feet
(15.4 meters). The minimum outside diameter (O.D.) at
top of shaft is 3.0 inches (76.2 mm), while the maximum
outside diameter (O.D.) at base of shaft is 12.5 inches
(317.5 mm). Our standard taper is 0.14" per foot of
length. This taper can be adjusted +/- 20% to meet th
customer's needs.
We Offer these square tapered poles
with additional components such as: baseplates,
handholes, anchor bolts, base covers, and pole caps. We
offer tenon mounts or drill mounts for luminaries.
Standard finishes for these poles include epoxy prime,
hot dip galvanized, epoxy paint or just bare steel.
Visit the
accesories section to review the options and lightning
fixtures available
|
back |
